|
- 8 Channels 10 bit analog input
- 8 digital I/O
- PWM Output
- 32 Bit pulse counter input
- RS232 interface 9600-115.2K
This Integrity Instruments data acquisition module uses RS232 communication to access 8 digital I/O points. The digital points can be configured as inputs or outputs in any combination. TTL and CMOS compatible for direct control.
The A/D channels are unipolar, with an input range of 0 to 10vdc.
RS232 connection is via a DB9 connector. The digital I/O and the analog channels are accessed via 15 pin connectors. Module power is applied through a 2.5mm connector.
|
Or Call: 800-450-2001
8:00 A.M.- 5:00 P.M. Mon.-Fri. Central
RS232 Analog and Digital I/O Module
Click on image for larger view.
|
|
|
RS232 Analog and Digital I/O Module
| Electronic Documents In PDF Format |
 |
|
|
|
Technical Data
| Specifications - RS232 Analog and Digital I/O Module |
| Temperature Range |
Tech data. |
| Software |
Free Easy-to-Use Software!
Interface Tools for Visual Basic, Visual C++, and
Test Point. |
| Analog Input Channels |
8 single ended |
| Analog Inputs |
0 to +10V
Unipolar |
| Linearity Error |
<± 1 LSB |
| Gain Error |
<± 1 LSB |
| Offset Error |
<± 1.5 LSB |
| Bandwidth |
1515 SPS maximum, continuous stream mode
115,200 baud, single channel |
| Digital I/O |
8 digital I/O lines (one 8 bit port)
I/O line data direction is software selectable |
| Digital I/O Current |
I/O line source/sink 25 ma
Total current 200 ma for the 8 bit port |
| Digital I/O Voltage Levels |
Input Off (0) = 0V - 0.8V
Input On (1) = 2.0V - 5.0V
Output Off (0) = 0.6V max.
Output On (1) = 4.3V min. |
| PWM Output |
PWM Freq.: 31.25KHz - 8MHz
PWM duty: 0%-100% |
| Pulse Counter |
Input 1 MHz max. input rate
32 bit counter capture
Counter increments on high-low transition |
| Communications |
RS232 (8 data bits, no parity, 1 stop bit)
50 feet maximum distance
|
| Baud Rate |
9600-115.2K BPS
DIP switch selectable |
| Command Protocol |
Simple ASCII commands. See the User's Manual |
| Operating Power |
7.5 Vdc to 24.0 Vdc, 50 ma nominal
100 ma max@24 volts
200 ma@12 or less Volts.
See our PS9J power supply |
Return to Serial Data Acquisition List
|
